• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this situation you'll need source some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you are going attempt to remove the glass panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not onto the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A sagging upvc window repair windows could cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need to open the window to get to the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fit. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you aren't able to move the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible to ensure your upvc window repair windows are watertight and secure from draughts.

uPVC handles may also become loose. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Luckily, it's not difficult to repair the loose upvc window repair window handle yourself. First, you'll need close your window and do an experiment to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window repair.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal than the frame. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. Changing a window hinge is essentially a simple process, but it's easier when you have a person to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also become disaligned as a result of wear, creating a gap between the frame and sash. If they are damaged beyond repair, it may be required to realign them. The interlock may be misaligned. This is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common reason for draughts is window seals. They can become worn down or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional immediately.